Set for its job
Tell us what the part does — on display, everyday use, carrying load, near heat. We choose walls, infill and layer height to match, so a bracket is not printed like an ornament.
One part is a normal order
Upload it. We price it. We print it.
Send us your model and say what the part is for. A person — not an algorithm — chooses the orientation, the strength and the supports, and sends you one clear price. You never have to learn a slicer setting. One part or a batch, in eighteen materials; and if all you have is the part itself, we can scan it.
- Materials
- 18PLA through PPS-CF
- Minimum quantity
- 1yes, really
- To get a quote
- €0no card needed
- Scan detail
- 0.015 mmmanufacturer-rated
How it works
Four steps. You do the first and the last.
- 1
Send your model
3MF, STL, OBJ or STEP. Tell us the quantity, the material if you know it, and what the part has to do. Not sure the file is right? Send it anyway — we will look and tell you straight.
- 2
We prepare it
A person who prints for a living opens your model and decides how it sits on the plate, how strong it needs to be inside and where it needs support — then prepares the exact print file.
- 3
You get one clear price
We email you the price for the whole order — exactly what you pay — and the date it will be ready. It is worked out from that exact print file — the file we price is the file we print.
- 4
Approve, and we print
Accept the quote, pay by bank transfer, and we print your parts and ship them by courier — or you collect them in Sofia. Nothing is charged until you accept.
Why a person prices it
You should not have to know slicer settings to get a fair price.
Orientation, walls, infill and supports decide both how strong a part is and what it costs. Choosing them well takes experience, so we do it for you — for the job your part has to do — and price the result.
The file we price is the file we print
Your price is worked out from the exact print file we prepared — the plastic it uses and the hours the machine spends on it. When you accept, that same file goes to the printer.
If a part fails, we print it again
At our expense, not yours — a failed print is our problem to solve.
No minimum quantity
Every order is a normal order, whatever its size.
Order one part. Order it again next month. Order four hundred. Each quote is worked out the same way.
Ordering more makes each one cheaper
Setting up the machine is paid once per build plate, not once per part — so parts that share a plate share the setup, and the price per piece falls.
Materials
Eighteen materials, and help choosing the right one.
From everyday prototyping grades to the high-temperature ones. If a cheap material will do the job, we will say so — the right part matters more to us than the bigger invoice.
Try it out
Prototyping grades
For fit checks, mock-ups and the three revisions before the one you keep. Cheap enough to be wrong on.
PLAPETGTPU
Dissolvable support available, so awkward internal shapes come out clean.
Make it last
Engineering grades
Parts that go into a product and stay there — housings, brackets, fixtures. The fibre-filled grades are stiff enough to stand in for machined aluminium.
ABSASAPCPAPA-CFPETG-CFPC-CF
Heated chamber and a hardened nozzle, which is what makes these repeatable.
Push it hard
High-performance grades
Heat, fuel, solvents, engine bays. We run these as standard work, on machines built for exactly this.
PPSPPS-CFPPA-CF
Holds shape past 250 °C and shrugs off most chemicals.
What each material is good for, and what it costs you in trade-offs
3D scanning
Only have the part? That is enough.
Some parts have no file and no drawing — discontinued, made by hand, or older than their maker’s records. Send them to us by courier, or — when the part cannot travel or the job is urgent — book a visit and we scan on site, anywhere in Bulgaria. Either way you get back a file, and from there printing a new one is the easy part.
The discontinued spare
The maker moved on; your machine didn’t. We scan a good example and print it whenever you need one.
The part with no drawing
Made by hand years ago and never documented. A scan brings it into CAD, where it can finally be kept — and improved.
The worn-out part
We rebuild the shape it was meant to have, not the one it has now — and can print it in a tougher material than the original.
The scanner is a Revopoint MetroY Ultra — manufacturer-rated to 0.015 mm single-frame accuracy. We are launching this service now, so we will publish our own measured figures once we have proven them on a reference part.
What we can make
Anything up to about the size of a shoebox.
Published up front because it is the first thing anyone asks. Bigger than this and we can often split the part — ask.
- Biggest single part
- 350 × 320 × 325 mmroughly a shoebox
- Hottest it will run
- 350 °C nozzlewhich is what makes the tough grades possible
- Heated chamber
- yes, fully enclosedstops big parts warping as they cool
- Materials on the shelf
- 18PLA through PPS-CF and PPA-CF
Pricing
One price, all in.
Your quote is one number for the whole order: material, machine time and our work. Shipping is paid to the courier on delivery — or you collect your order, free.
What decides your price
- How much plastic the part needs
- How long the machine prints it
- The material, and how demanding it is to run
- Our time: preparing the plate, removing support, checking each part
- How many parts share a plate
All of it is measured from the print file we prepare for your part, not guessed from its size.
Good to know
The questions people actually ask.
Short answers, no jargon. If yours is not here, just ask — the contact page reaches a person, not a ticket queue.
Why is there no instant price?
Because the settings that decide a price — orientation, walls, infill, supports — also decide whether the part does its job. An instant calculator would have to ask you to choose them. We would rather a person who prints for a living chooses them for you, and prices what will actually be printed.
What happens after I send a model?
A person opens it, checks it will print well, prepares it and emails you the price with the date your order will be ready. If something about the model needs a decision from you, we ask first.
What is infill, and does it change the price?
Parts are not printed solid: inside, a lattice saves plastic and time. More infill and more walls make a part stronger and heavier, and cost more. We choose them for the job your part does — tell us if you need it stronger or lighter than usual.
Why does PA-CF cost more than PLA?
PA-CF is nylon reinforced with carbon fibre — stiff enough to stand in for machined aluminium in many brackets. It needs a heated chamber, a hardened nozzle and slower, hotter printing, so what you are paying for is machine time, not a premium label.
What kind of file do I need?
3MF, STL, OBJ or STEP — every CAD tool and most 3D apps export at least one of them. If you only have a drawing or a sketch, get in touch: turning it into a printable model is often a small job.
Can I change the material or quantity after I get the price?
Yes — reply, or send a new request, and we prepare a new quote. The price always matches the exact file we will print, so any change gets its own quote.
How do I pay?
By bank transfer, after you accept the quote and before we print. We do not charge VAT, so the price is what you pay, and you get an invoice.
I do not have a file — only the physical part. Can you still help?
Yes — that is our scanning service. Send the part by courier — or book an on-site visit: we scan it, you approve the file, and it is yours to keep. If you want, we then print a new part straight from it.
The part cannot leave my workshop. Do you do on-site visits?
Yes, anywhere in Bulgaria — the scanner is portable. Travel is its own line on the quote, priced by region and agreed before we set off; urgent visits are scheduled ahead of the queue and priced accordingly.
My part will be on show — will the layers be visible?
Every FDM print is built in layers, and on curved or sloping surfaces they show. Tell us the part is for display and we print it with finer layers and smoother top surfaces. To be visually perfect it will still need finishing by hand, which we do not offer today.
Your work stays yours
We are not going to do anything with your files.
Your files make your parts. Nothing else.
Never shared, never resold, and never shown as an example of our work without you saying so in writing.
Stored in the EU, and on the record.
Your account, models and orders are stored in data centres in Germany, encrypted there and on the way there, and every change to your order is recorded.
Handled to a standard
Your data is handled under GDPR. ISO 9001, 14001 and 27001 are on our roadmap — we are building to those standards now, and we would rather say "roadmap" than let a logo imply more.
Send us the part you are unsure about.
The awkward shape, the unusual material, the one you only need one of, the part that exists only in your hand. That is the work we like. A quote costs nothing — and for a physical part, a photo and a sentence get you an answer.